HPE XP7

Arrays
About Arrays
The Arrays component type consists of the Frontend IOs, MBs of data transfer, average response time,
and maximum response time of the components in an array. This screen displays the graphical
representations of the components usage during the selected threshold time interval. The arrays are
listed according to their health status. The critical arrays are listed first and then followed by need
attention arrays. Either choose Preset interval (1hour, 6 hour ,12 hours, 1 days ,1 week, or last 10
collections) or customize the time interval by providing the start and end time.
Array screen details
Screen component Description
Total IO- Frontend Displays the graphical representation of total Frontend IOs for the
Ldevs in the array for the selected time interval.
Total MB- Frontend Displays the graphical representation of total Frontend throughput for
Ldevs in the array for the selected time interval.
Average Response Time-
Frontend
Displays the graphical representation of the average response of Ldevs
for the reads and writes in the array for the selected time interval.
Max Response Time-
Frontend
Displays the graphical representation of maximum response of Ldevs
for the reads and writes in the array for the selected time interval.
Average Read Response
Time
Displays the graphical representation of the average read response of
Ldevs for the reads in the array for the selected time interval.
Average Write Response Time Displays the graphical representation of the average write response of
Ldevs for the writes in the array for the selected time interval.
Max Read Response Time Displays the graphical representation of maximum response of Ldevs
for the reads in the array for the selected time interval.
Max Write Response Time Displays the graphical representation of maximum response of Ldevs
for the reads in the array for the selected time interval.
Viewing other components in the array
Procedure
1. From HPE XP 7 Performance Advisor, select Array > Actions.
2. To choose the duration, either select the Preset value or select Custom option. Provide the start and
end time when you select the Custom option and click Apply.
3. Select one of the following to view respective array component:
• Ports
• Hostgroup
Arrays 87