HPE XP7

Screen elements Description
RG The RAID Group to which the LDEV belongs.
SLPR The SLPR with which the RAID Group is associated.
NOTE: SLPR does not exist in the P9500/XP7 disk arrays.
So, the SLPR-related data is displayed only for the XP disk
arrays.
SLPR name The SLPR group ID.
NOTE: SLPR does not exist in the P9500/XP7 disk arrays.
So, the SLPR group ID is displayed only for the XP disk
arrays.
CLPR The CLPR with which the RAID Group is associated.
CLPR name The CLPR group ID.
LDEV IOPS The total frontend I/Os for all random reads, random writes,
sequential reads, and sequential writes during the reporting
period.
LDEV MBPS The total frontend throughput in MB/s for the LDEV.
Backend Transfer The total number of backend tracks transferred to or from the XP
array backend.
Combined Backend Transfer * is displayed beside the combined backend transfer value
indicates one of the following:
• If any of the physical LDEVs from a RAID Group is configured
in multiple ThP pools, the sum of the backend transfer on all
the ThP pools will be shown as combined backend transfer
for that RAID Group. (The backend transfer of each ThP pool
is the sum of backend transfer on V-Vols belonging to that
ThP pool).
• If physical LDEVs from multiple RAID Groups are configured
in a ThP pool, the combined backend transfer will be reported
as an aggregate value for all the RAID Groups.
% RGUtil Random Read The random read utilization percentage for a RAID Group.
% RGUtil Random Write The random write utilization percentage for a RAID Group.
% RGUtil Random Write Party % RGUtil Random Write Parity The random write parity utilization
percentage for a RAID Group.
% RGUtil Sequential Read The sequential read utilization percentage for a RAID Group.
Table Continued
196 Summary view