What to do if hpmont HD5L-4T3P7 Controller displays E0029 error?
If the hpmont Controller displays error E0029, which indicates SCI communication error, check the connection, correctly set the communication format and the baud rate, and send the data according to MODBUS protocol.
What to do if hpmont Controller displays E0037 error?
If the hpmont Controller displays error E0037, which indicates a governor fault, replace governor and replace circuit.
What to do if hpmont Controller displays E0015 error?
If the hpmont Controller displays error E0015, which indicates input voltage phase loss, check the three-phase power input.
What to do if hpmont HD5L-4T3P7 Controller displays E0024 error?
If the hpmont Controller displays error E0024, which indicates a fault of external equipment, check external equipment.
What to do if hpmont HD5L-4T3P7 displays E0028 error?
If the hpmont Controller displays error E0028, which indicates SCI communication timeout, check the connection.
What to do if hpmont Controller displays E0030 error?
If the hpmont Controller displays error E0030, which indicates wrong PG direction, set the reverse value of F11.02.
What to do if hpmont Controller displays E0031 error?
If the hpmont Controller displays error E0031, which indicates PG direction reverse, check the PG connection.
What to do if hpmont HD5L-4T3P7 displays E0033 error?
If the hpmont Controller displays error E0033, which indicates Z signal loss of ABZ encoder, check the connection.
What to do if hpmont Controller displays E0034 error?
If the hpmont Controller displays error E0034, indicating a UVW signal wrong of UVW encoder, check the UVW connection.
What to do if hpmont HD5L-4T3P7 Controller displays E0035 error?
If the hpmont Controller displays error E0035, which indicates CD phase wrong of SINCOS encoder, check the PG and the PG connection.
General| Brand | hpmont |
|---|---|
| Model | HD5L-4T3P7 |
| Category | Controller |
| Language | English |
Details restrictions on output side components, voltage, input phases, and derating.
Lists electrical, performance, and protection specifications of the controller.
Provides a table of model ratings for single-phase and three-phase power supply.
Lists essential safety precautions that must be followed during installation.
Specifies environmental and spatial requirements for the installation location.
Outlines critical safety rules and precautions for electrical wiring.
Recommends peripheral devices for the main circuit based on model specifications.
Details the main circuit terminals and provides general wiring guidelines.
Discusses control circuit safety, cable management, and interference suppression.
Introduces different types of encoder cards and their respective functions.
Explains how to ensure Electromagnetic Compatibility (EMC) during installation.
Explains the step-by-step process for motor parameter auto-tuning.
Describes the battery-driven run mode for emergency situations during power outages.
Lists common fault codes, their possible reasons, and recommended countermeasures.
Lists fault protect parameters and their attributes.
To Next Page
