What to do if hpmont HD5L-4T3P7 displays E0012 error?
If the hpmont Controller displays error E0012, indicating a motor auto-tuning fault, check the motor connection and input correct nameplate parameters.
What to do if hpmont HD5L-4T3P7 displays E0013 error?
If the hpmont Controller displays error E0013, which indicates soft start contactor failed, replace the contactor.
General| Brand | hpmont |
|---|---|
| Model | HD5L-4T3P7 |
| Category | Controller |
| Language | English |
Details restrictions on output side components, voltage, input phases, and derating.
Lists electrical, performance, and protection specifications of the controller.
Provides a table of model ratings for single-phase and three-phase power supply.
Lists essential safety precautions that must be followed during installation.
Specifies environmental and spatial requirements for the installation location.
Outlines critical safety rules and precautions for electrical wiring.
Recommends peripheral devices for the main circuit based on model specifications.
Details the main circuit terminals and provides general wiring guidelines.
Discusses control circuit safety, cable management, and interference suppression.
Introduces different types of encoder cards and their respective functions.
Explains how to ensure Electromagnetic Compatibility (EMC) during installation.
Explains the step-by-step process for motor parameter auto-tuning.
Describes the battery-driven run mode for emergency situations during power outages.
Lists common fault codes, their possible reasons, and recommended countermeasures.
Lists fault protect parameters and their attributes.
To Next Page
