HPRT TP809

TP809 Programming Manual
33
7 Barcode Commands
GS h n
[Function]
Set bar code height
[Format]
ASCII
GS h n
Hex
1D 68 n
Decimal
29 104 n
[Range]
1 ≤ n ≤ 255
[Default]
n = 162
[Description]
• Sets the height of the bar code to n dots.
GS f n
[Function]
Select font for HRI characters
[Format]
ASCII
GS f n
Hex
1D 66 n
Decimal
29 102 n
[Range]
n = 0, 1, 48, 49
[Default]
n = 0
[Description]
Select a font for the HRI characters when printing a bar code.
n
Font for the HRI characters
0,48
Character font A (12 × 24)
1,49
Character font B (9 × 17)
GS H n
[Function]
Select print position of HRI characters
[Format]
ASCII
GS H n
Hex
1D 48 n
Decimal
29 72 n
[Range]
0 ≤ n ≤ 3, 48 ≤ n ≤ 51
[Range]
n = 0
[Description]
Select the print position of HRI characters when printing a bar code.
n
Print position
0, 48
Not printed.
1, 49
Above the bar code.
2, 50
Below the bar code.
3, 51
Both above and below the bar code.