HPRT TP809 Programming Manual

TP809 Programming Manual
48
10. Miscellaneous Commands
ESC S
[Function]
Select standard mode
[Format]
ASCII
ESC S
Hex
1B 53
Decimal
27 83
[Range]
None
[Default]
None
[Description]
Switches from page mode to standard mode.
[Notes]
■ This command is enabled only in page mode. Page mode can be selected by ESC L.
■ When this command is executed, data in all the print areas is cleared, the print area
set by ESC W returns to the default value, but the value set by ESC T is maintained.
■ The following commands switch the settings for standard mode because these
commands can be set independently in standard mode and in page mode:
• ESC SP, ESC 2, ESC 3, ESC U, and FS S.
■ In standard mode, CAN, ESC FF, GS $, GS Q and GS \ are ignored.
■ The settings of ESC T and ESC W, GS ( P do not affect printing in standard mode.
■ The printer selects page mode with ESC L.
■ Standard mode is selected as the default.

HPRT TP809 Specifications

General

Brand	HPRT
Model	TP809
Category	Printer
Language	English