HPRT TP809 Programming Manual

TP809 Programming Manual
56
• If the power is turned off or the printer is reset via an interface while this command is
being executed, the printer may go into an abnormal condition. Do not turn the power
off or do not reset the printer via an interface while this command is being executed.
• While processing this command, the printer may become BUSY while writing the data
to the NV memory and stops receiving data. Therefore, do not transmit data from the
host computer while the printer is BUSY.
m
Mode
Vertical direction
Horizontal direction
0,48
Normal
203dpi
203dpi
1,49
Double-width
203dpi
101dpi
2,50
Double-height
101dpi
203dpi
3,51
Quadruple
101dpi
101dpi
(nL + nH × 256)
Maintenance counter [Units]
Hex
Decimal
14
20
Number of lines fed. [Lines]
15
21
Number of head energization. [Times]
32
50
Number of auto cutter operations. [Times].
46
70
Duration of printer operation. [Hours].
ESC 2
[Type]
Line spacing
[Function]
Select default line spacing
[Format]
ASCII
ESC 2
Hex
1B 32
Decimal
27 50
[Description]
Sets the line spacing to approximately 4.23 mm {30×0.125mm}

HPRT TP809 Specifications

General

Brand	HPRT
Model	TP809
Category	Printer
Language	English