GSC60
EN - 11
5.1.5. Operator name entry
Touch the icon to enter the name of the operator that
will be displayed in the header of each measurement
downloaded to PC. The screen to the side appears on the
display.
Set the desired name using the virtual keyboard (max 12
characters).
Confirm the settings or exit without saving.
5.1.6. System date/time setting
Touch the icon to set the system date/time. The screen
to the side appears on the display.
Touch the "EU" icon for the European date/time system in
the format "DD/MM/YY hh:mm" or the "US" icon for the
American system in the format "MM/DD/YY hh:mm AM/PM".
Touch the up/down arrow keys to set the desired value.
Confirm the settings or exit without saving.
Current date/time is kept inside the instrument without
batteries for approximately 12 hours.
5.2. INFORMATION
Touch the icon . The display shows the screen on the
right with the icons relative to the properties of the
instrument, the optional accessories IMP57 and T2100 and
the HTAnalysis APP
Touch the icon . The display shows the screen on the
right as well as following information:
Serial number
Internal version of Firmare and Hardware (for the
accessories IMP57 and T2100 these informations are
available only after the connection to the instrument)
Last calibration date
Touch the icon . The display shows the screen on the
right with the QR code of HTAnalysis APP (see § 8.1) in
iOS and Android systems. This code permits an easy
access to the Apple Store to download the APP
Touche the icon to exit and return to the general menu
To Next Page
Loading...
General