GSC60
EN - 97
7.1.3. Recall and delete saved recordings
The recordings are automatically saved inside memory at the pressure of GO/STOP key
or at the end of set stop date/time. The SAVE key allows saving the instantaneous
snapshots show at display and follow the same features of safety tests.
Touch the icon to recall the list of saved recordings (LEAK, AUX and PQA functions)
performed by the instrument. The following screen is shown
1. Select the desired recording indicated as “REC_xxx”
and touch the to recall at display. The followed
screen is shown
2. In the screen is shown:
The recording number
The date/time of start recording (if automatic)
The date/time of stop recording (if automatic)
The aggregation time set
The number of aggregation intervals recorded
The residual memory capacity expressed in DD-HH-
MM
The number of detected voltage anomalies (sags,
swells).
The name of recording is not modify on the
instrument.
Touch the icon to return to the previous screen
Touch the icon to delete the last saved
recording
Touch the icon to delete all the saved recordings
To Next Page
Loading...
General