GSC60
EN - 96
7.1.2. Recall and delete safety measurements and snapshots
1.
Touch the icon in the general menu. The screen
to the side appears on the display.
Each measurement is identified by the icons (test
with positive result) (test with negative result) or
(test without outcome).Touch the desired measurement
to select it on the display.
Touch the icon to recall the measurement result.
The following screen appears on the display:
2.
Touch the icon to recall and possibly change the
comment entered when saving via the internal virtual
keyboard.
Touch the icon to go back to the previous screen.
3.
Touch the icon to recall the results of saved
recordings (see § 7.1.3)
Touch the icon to delete the last saved result in
the instrument memory. The following screen
appears on the display:
Touch the
icon to confirm the operation or the
icon to return to the previous screen.
4.
Touch the
icon to delete all the results stored in
the memory of the instrument. The following screen
appears on the display:
Touch the
icon to confirm the operation or the
icon to return to the previous screen.
To Next Page
Loading...
General