HTC Smart - Setting up a Conference Call

Chapter 3 Phone Calls 57
To Do this
Answer the second call Press the CALL button. This puts the first
call on hold.
Reject the second call Press the END CALL/POWER button.
Switch calls After answering both calls, press the CALL
button to switch from one call to another.
Tip You can also press MENU, and then tap
Switch call.
Merge calls After answering both calls, press MENU,
and then tap More > Merge calls.
Dial a number or
contact while in a call
While in a call, press MENU, and then do
any of the following:
• Place a second call. Tap People to select
a contact to call, or tap Keypad to dial a
phone number.
• Start a conference call by tapping
Add call. For details, see “Setting up a
conference call” in this chapter.
Note Placing another call puts the ongoing call
on hold.
Setting up a conference call
Before starting a conference call, make sure your SIM card is enabled
with conference calling service.
1. Press the CALL button to open the Phone dialer.
2. Make a call to the first conference call participant.