208 Managing Your Device
Connections tab
Icon Description
Advanced Network Turn HSPA on/off, set the GPRS authentication method, and
set the line type to use when making a circuit switch data (CSD) connection. HSPA
is a 3.5G digital data service that provides high-speed downstream/upstream
data rates. Check with your wireless service provider whether HSPA is supported
in your area.
Beam Set your device to receive incoming Bluetooth beams.
Bluetooth Turn Bluetooth on, set your device to visible mode, and scan for other
Bluetooth devices.
Comm Manager Manage your device’s connections (including the phone,
GPRS/3G, Wi-Fi, and Bluetooth) or turn the phone function on or off.
Connection Setup Configure your device’s data connections, such as GPRS, and
WAP, based on the detected SIM card or selected network operator. See “Using
Connection Setup” in this chapter for details.
Connections Set up one or more types of modem connection for your device,
such as phone dial-up and GPRS, so that your device can connect to the Internet
or a private local network.
Domain Enroll Enroll your device in your company’s domain to let System Center
Mobile Device Manager manage the device. Ask your network administrator for
more details.
USB to PC Set the type of USB connection to your PC. Select the ActiveSync
option for synchronizing data, or use Disk Drive mode for transferring files.
Wi-Fi Turn the Wi-Fi function on or off, scan for available wireless networks, see
information about the active wireless network, and customize Wi-Fi settings.
To Next Page
Loading...
Need help?
General
