Managing Your Device 217
13.8 Managing Memory
To see the available device memory
1. Tap Start > Settings, and then tap All Settings.
2. On the System tab, tap Memory > Main tab. The amount of memory
allocated to data storage versus program storage is displayed, as well as the
amount of memory in use versus the available memory.
To see the available storage card space
1. Tap Start > Settings, and then tap All Settings.
2. On the System tab, tap Memory > Storage Card tab.
13.9 Resetting Your Device
Performing a soft reset
Perform a soft (normal) reset to clear all active program memory and shut down all
active programs. This is useful when your device is running slower than normal, or a
program is not performing properly. If a soft reset is performed when programs are
running, unsaved work is lost.
To perform a soft reset
1. Pull out the stylus, then remove the
back cover.
2. Use the stylus tip to press the RESET
button (red) located at the opening
of the stylus bay.
Your device restarts and displays the
Home screen.
To Next Page
Loading...
Need help?
General
