Getting Started 37
1.10 Adjusting the Volume
A single volume control adjusts both the system volume (notifications and audio/
video playback volume) and the phone ring volume of your device.
1. Press the VOLUME UP/DOWN button on the left panel of your device to open
the Volume screen.
2. To increase or decrease the volume
level, drag your finger up or down the
volume bars, or press the VOLUME
UP/DOWN button.
• Touch Silent to mute the device
volume.
• Touch Vibrate to switch the device
to Vibrate mode.
3. The Volume screen automatically
closes. You can also tap an empty area
of the Volume screen to close it.
Note Use the VOLUME UP/DOWN button on
the left panel of your device to adjust
the conversation phone volume during
an ongoing call.
Volume bars
To adjust the system and ring volumes separately
Slide to the Settings tab, and then touch Sound.
Turn off the Single Volume option.
Press the VOLUME UP/DOWN button.
To switch between the Ring Volume and System Volume screens, touch
Ring or System at the top of the screen.
Follow steps 2 to 3 of the previous section to adjust the volume level.
1.
2.
3.
4.
5.
To Next Page
Loading...
Need help?
General
