Huawei FusionModule800 Maintenance Guide

FusionModule800 Smart Small Data Center
Maintenance Guide
A Preventive Maintenance Table
Issue 02 (2016-11-15)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
117
Maintenance area
Item
Operation
Expected Result
Troubleshootin
g
Indicator
N/A
The indicator on
the PSU is steady
green.
Check the output
voltage and
determine whether
the PSU is faulty.
If the PSU is
faulty, replace it.
Fan
N/A
No abnormal noise
is generated.
If abnormal noise
is generated, clean
the fan.
Operating
environment
N/A

Ambient
temperature:
–20°C to +65°C

Humidity:
0–95% RH
(non-condensin
g)
If the humidity or
temperature is
abnormal, check
the air conditioner
status.
Monitoring module
indicator
N/A
The monitoring
module indicator is
steady green or
blinking green.
If the indicator is
off or any
abnormal
condition occurs,
see 4.3
Monitoring
System
Troubleshooting
to rectify the fault.
Network interface
indicator
N/A
The green indicator
is steady on, and
the yellow
indicator is
blinking.
Check the network
cable connection.
Monitor interface
(network
management system
or Web)
N/A
Export air
conditioner logs,
alarms,
temperature,
humidity, as well
as the operating
status and time of
the water sensor,
door status sensor,
temperature sensor,
and smoke sensor
from the
monitoring system.
View the historical
alarms generated in
this quarter and
select the most
common five ones.
Rectify faults if an
alarm is generated
by referring to 3
Alarm References
and 4.3
Monitoring
System
Troubleshooting
or contact Huawei
technical support.

Huawei FusionModule800 Specifications

General

Brand	Huawei
Model	FusionModule800
Category	Storage
Language	English