EasyManuals Logo

Huawei FusionModule800 Maintenance Guide

Huawei FusionModule800
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #71 background imageLoading...
Page #71 background image
FusionModule800 Smart Small Data Center
Maintenance Guide
5 Parts Replacement
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
65
a. Choose Home.
b. Tap the cabinet that houses the air conditioner in the micro-module view.
c. Tap the air conditioner to be set in the cabinet layout diagram.
d. Choose Real-time Data > Perf Maint, clear up the condensate pump total running
time.
Method 2: Log in to the ECC800 WebUI as admin. Choose Monitoring > Air
Conditioner > NetCol5000-A0104 > Controls > Performance Maint Ctrl, clear up the
condensate pump total running time.
----End
5.3.1.4 Replacing a Humidifier Pump
Prerequisites
Tool: Phillips screwdriver.
A humidifier pump needs to be replaced.
A spare humidifier pump of the same model is available and functional.
Context
The humidifier pump is maintained from the rear.
Procedure
Step 1 Shut down the air conditioner over the EMS.
Method 1: Log in to the ECC800 mobile phone or pad app as admin.
a. Choose Home.
b. Tap the cabinet that houses the air conditioner in the micro-module view.
c. Tap the air conditioner to be set in the cabinet layout diagram.
d. Choose Real-time Data > OFF.
Method 2: Log in to the ECC800 WebUI as admin. Choose Monitoring > Air
Conditioner > NetCol5000-A0104 > Controls > Ctrl Info, set On/off status on
EMS > Off, and then click Submit.
0104 in NetCol5000-A0104 is variable and subject to changes with the air conditioner connection
sequence. The displayed value prevails.
Step 2 Disconnect the power supply from the air conditioner control unit after the air conditioner
shuts down over the EMS.
Step 3 Remove the return air filter by referring to 5.3.1.1 Replacing a Return Air Filter.
Step 4 Remove the hose clamps at the inlet and outlet hoses of the humidifier pump using a Phillips
screwdriver, and remove the hoses, as shown in Figure 5-30.
Step 5 Unscrew the top metal sheet of the humidifier pump using a Phillips screwdriver by removing
the two screws, as shown in Figure 5-30.
Step 6 Take the humidifier pump outwards, as shown in Figure 5-30.

Table of Contents

Other manuals for Huawei FusionModule800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei FusionModule800 and is the answer not in the manual?

Huawei FusionModule800 Specifications

General IconGeneral
BrandHuawei
ModelFusionModule800
CategoryStorage
LanguageEnglish

Related product manuals