Figure 5-18 Process for configuring the BIOS
Procedure
Restart the server.
1 On the virtual real-time desktop of the G560, click on the menu bar.
2 Select Forced System Reset.
The system displays "Are you sure to perform this operation?"
3 Click Yes.
The server restarts.
4 Press Delete on the BIOS startup screen as shown in Figure 5-19 to start the BIOS Setup
Utility.
NOTE
– Press Delete to go to the BIOS Setup Utility.
From a remote serial port, you can press F4 to go to the BIOS Setup Utility.
– Press F11 to go the boot manager screen for selecting a boot device.
From a remote serial port, you can press F3 to go the boot manager screen for selecting a boot
device.
– Press F12 to boot from the network.
FusionServer G5500 Server
User Guide
5 Configuring the G5500
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
95
To Next Page
Loading...
