24 Press F10.
The Exit Saving changes? dialog box is displayed.
25 Select Yes and press Enter.
----End
5.5.7 Installing an OS
This topic describes how to install an OS for the G530 V2.
Use the Huawei Server Compatibility Checker to check OSs supported by the G530 V2.
You are advised to install an OS on an HDD.
Currently, only Red Hat Enterprise Linux (RHEL) 7.1 supports scheduled hot swap of NVMe
SSDs.
For details about how to install an OS on an HDD, see the HUAWEI Server OS Installation
Guide.
For details about how to install an OS on an NVMe SSD, see Directly Installing an OS in
the HUAWEI Server OS Installation Guide.
NOTE
To upgrade the NVMe SSD driver, download the driver file in the vendor's official website.
5.6 Configuring the PCIe Topologies
This topic describes how to configure logical topologies for the G5500.
Procedure
Step 1 Log in to the management module CLI. For details, see 5.3.1 Logging In to the
Management Module CLI.
Step 2 Configure PCIe topologies on the management module CLI. For details, see the FusionServer
G5500 Server 1.0.0 HMM Command Reference.
----End
FusionServer G5500 Server
User Guide
5 Configuring the G5500
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
120
To Next Page
Loading...
