Item Specifications
Acoustic noise Noise emissions are measured in accordance with ISO 7999 (ECMA
74) and declared in accordance with ISO 9296 (ECMA 109). The data
listed in the following is the declared A-weighted sound power levels
(LWAd) and declared average bystander position A-weighted sound
pressure levels (LpAm) when the server is operating in a 23°C (73.4°F)
ambient environment:
Idle:
l LWAd: 6.2 Bels
l LpAm: 45 dBA
NOTE
The actual sound levels generated when the server is operating vary depending on
the server configuration, workload, and ambient temperature.
Vibration
l One cyclical sweep in each axial direction at the rate of 0.1 oct/min,
a total of three axial directions.
l 5 to 10 Hz: 5 mm (0.2 inch, peak-to-peak value).
l 10 to 100 Hz: 1 m/s2.
Shock Half sine wave, peak acceleration of 2 G, 11 ms, 3 times for each
surface, a total of three axial directions.
Corrosive air
pollutant
l Copper corrosion rate test requirements: The corrosion product
thickness growth rate is lower than 300 Å/month (meeting level G1
requirements of the ANSI/ISA-71.04-2013 standard on gaseous
corrosion).
l Silver corrosion rate test requirements: The corrosion product
thickness growth rate is lower than 200 Å/month.
Particulate
pollutant
l The equipment room environment meets the requirements of ISO
14664-1 Class 8.
You are advised to ask a professional organization to monitor
particulate pollutants in the equipment room.
l There is no explosive, conductive, magnetic, or corrosive dust in the
equipment room.
Rated input
voltage
12 V DC
Maximum
power
l G560: 660 W
l GP608: 2400 W
l G530 V2: 600 W
l GP316: 1400 W
11.4 G560 Specifications
Table 11-7 lists the G560 specifications.
FusionServer G5500 Server
User Guide
11 Specifications
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
190
To Next Page
Loading...
