Huawei FusionServer G5500 - 5.1 Configuration Overview; 5.2 Default Data

5.1 Configuration Overview
This topic describes the initial configuration process for the G5500 using a local PC.
Configure the G5500 after it is installed. Figure 5-1 shows the process for configuring the
G5500.
Figure 5-1 Configuration process
5.2 Default Data
This topic describes the default data for configuring the G5500.
Management Module Default Data
Table 5-1 lists the default data for the management module.
Table 5-1 Management module default data
Default User
Name
Default Password Default IP
Addresses
Default Subnet
Mask
Administrator Admin@9000
l Slot 1:
10.10.1.201
l Slot 2:
10.10.1.202
255.255.255.0
G560 Default Data
Table 5-2 G560 default data
User
Name
Description Default
Password
User Type User
Status
Login
Method
root An iBMC user. Huawei12#$ Administrat
ive User
Enabled Remote
or local
login
FusionServer G5500 Server
User Guide
5 Configuring the G5500
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
68