Huawei FusionServer G5500 - Configuring the G560

Parameter Description Value
ipaddr6 Specifies the IPv6 address of
the network port to be
configured.
The value is an IPv6 address in the
format of
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxx
x. When multiple continuous xxxx are 0,
the value is in the format of xxxx::xxxx.
For example,
2001:0000:000:0000:0000:0000:0000:
0001 can be written as 2001::0001.
An IPv6 address can contain only one
xxxx::xxxx.
prefixlen Specifies the subnet prefix
length of the network port to
be configured.
0 to 128.
gateway6 Specifies the IPv6 gateway
address of the network port
to be configured.
The value is an IPv6 address in the
format of
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxx
x. When multiple continuous xxxx are 0,
the value is in the format of xxxx::xxxx.
For example,
2001:0000:000:0000:0000:0000:0000:
0001 can be written as 2001::0001.
An IPv6 address can contain only one
xxxx::xxxx.
Step 2 Configure other basic management module data.
For details about how to configure other basic data for the management module, see the
FusionServer G5500 Server 1.0.0 HMM Command Reference.
----End
5.4 Configuring the G560
This topic describes how to configure the installed G560 to support upper-layer services.
Configuration Process
Figure 5-8 shows the initial configuration process for the G560.
FusionServer G5500 Server
User Guide
5 Configuring the G5500
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
82