Huawei FusionServer G5500 - 6.8 Management Module

Figure 6-52 Installing an I/O module
Step 4 Close the ejector lever on the I/O module. See (2) in Figure 6-52.
----End
6.8 Management Module
6.8.1 RTC Battery
Installing the RTC Battery
Step 1 Remove the management module. For details, see Removing a Management Module.
Step 2 Place the management module on the ESD floor.
Step 3 Take a spare RTC battery out of its ESD bag.
Step 4 Figure 6-53 shows the location of the RTC battery.
FusionServer G5500 Server
User Guide
6 Optional Part Installation
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
168