Step 7 Take a spare supercapacitor out of its ESD bag.
Step 8 Press and hold down the plastic latches and push the supercapacitor into the supercapacitor
tray. Ensure that the supercapacitor is secured by the plastic latches. See (1) and (2) in Figure
6-11.
Figure 6-11 Installing the supercapacitor
Step 9 Connect the power cable between the supercapacitor and RAID controller card. See (3) in
Figure 6-11.
----End
6.2.6 BIOS Battery
Installing the BIOS Battery
Step 1 Power off the G560. For details, see 3.1 Powering Off the Compute Node.
Step 2 Remove the G560. For details, see 3.3 Removing the G560.
Step 3 Place the G560 on the ESD floor.
Step 4 Remove the cover. For details, see 3.7 Cover.
Step 5 Determine the location for installing the G560 BIOS battery. See Figure 6-12.
FusionServer G5500 Server
User Guide
6 Optional Part Installation
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
134
To Next Page
Loading...
