Figure 6-40 Installing the TPM
Step 8 Tighten the screw of the TPM using a Phillips screwdriver. See (2) in Figure 6-40.
Step 9 Install the cover. For details, see Installing the Cover of a G530 V2.
Step 10 Install the G530 V2. For details, see 4.4.4 Installing a G530 V2.
Step 11 Power on the G530 V2. For details, see 3.2 Powering On the Compute Node.
----End
6.4.6.2 Enabling the TPM
Step 1 Access the BIOS. For details, see 5.5.6 Configuring the BIOS.
Step 2 Select Security.
Step 3 Select TPM Operation and press Enter.
Step 4 Select Enable and press Enter.
Step 5 Press F10.
The Exit Saving changes? dialog box is displayed.
Step 6 Select Yes and press Enter.
Step 7 Press Esc to exit the BIOS.
Step 8 Restart the G530 V2 for the TPM settings to take effect.
----End
6.4.7 USB
Installing the USB Flash Drive
Step 1 Power off the G530 V2. For details, see 3.1 Powering Off the Compute Node.
FusionServer G5500 Server
User Guide
6 Optional Part Installation
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
159
To Next Page
Loading...
