Huawei FusionServer G5500 - Page 168

Step 2 Remove the G530 V2. For details, see 3.5 Removing a G530 V2.
Step 3 Place the G530 V2 on the ESD floor.
Step 4 Remove the cover. For details, see Removing the Cover of a G530 V2.
Step 5 Determine the location for installing the USB flash drive. See Figure 6-41.
Figure 6-41 USB ports
Step 6 Take a spare USB flash drive out of its ESD bag.
Step 7 Insert the USB flash drive into the connector on the G530 V2. See Figure 6-42.
Figure 6-42 Installing the USB flash drive
FusionServer G5500 Server
User Guide
6 Optional Part Installation
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
160