Figure 6-22 8-pin power cables
Step 10 Install the cover of the GP608. For details, see 3.7 Cover.
----End
Installing a GPU Filler Module
Step 1 Remove the GP608. For details, see 3.4 Removing the GP608.
Step 2 Place the GP608 on the ESD floor.
Step 3 Remove the cover. For details, see 3.7 Cover.
Step 4 Take a spare GPU filler module out of its ESD bag.
Step 5 Determine the location for installing the GPU filler module. Figure 6-23 shows the locations
of GPU filler modules.
FusionServer G5500 Server
User Guide
6 Optional Part Installation
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
142
To Next Page
Loading...
