No. Item Description
7 Hard disk The compute node supports a maximum of two 2.5-inch
hard disks (SAS, SATA, or NVMe SSDs). Mixed
configuration of HDDs and SSDs is allowed. Each hard disk
is hot-swappable and can be independently installed and
removed.
NOTE
In Legacy mode, the BIOS does not support 4Kn hard disks (which
have 4K bytes sectors in both the physical layer and logical layer).
8 Mainboard The mainboard holds the CPUs, DIMMs, hard disk interface
modules, power control module, iBMC, logic module,
chipset, and video adapter. The Intel® C620 chipset is used.
The video adapter is integrated in the iBMC HI1710 chipset
to provide a 32 MB display memory. The maximum
resolution is 1920 x1200 at 60 Hz with 16 M colors.
9 Hard disk tray Hard disk tray
10 CPU The mainboard supports two CPUs.
l The following CPU models are supported:
Intel® Xeon® Scalable (Bronze 3100, Silver 4100, Gold
5100/6100, and Platinum 8100) series processors with up
to 165 W power, each supporting a maximum of 28
cores.
l Each CPU is integrated with a memory controller and
supports six DDR4 memory channels. Each channel
supports two DDR4 DIMMs of a 2400 or 2666 MHz
frequency.
l Each CPU integrates a PCIe controller with 48 lanes and
supports PCIe 3.0.
l The two processors are interconnected through two
UltraPath Interconnect (UPI) buses at 10.4 GT/s.
l The maximum frequency is 3.6 GHz.
NOTE
The G530 V2 does not support single-processor configuration, and
the two processors must be of the same model.
11 Mezzanine card
tray
Houses a mezzanine card.
12 Mezzanine card The G530 V2 supports only one mezzanine card. The
mezzanine card provides two PCIe 3.0 x16 channels and is
connected to the mainboard through four connectors and to
the GP316 through the chassis backplane.
FusionServer G5500 Server
User Guide
11 Specifications
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
187
To Next Page
Loading...
