Huawei OptiX OSN 3500 - Clock and Network Management Cabling

58
A
A
1
2
3
4
5
6
Clock Ports
a
A
A
Select appropriate clock cables according to the
type of the clock port on the opposite equipment.
75-ohm clock output 1
75-ohm clock output 2
75-ohm clock input 1
75-ohm clock input 2
120-ohm clock input/output 1
120-ohm clock input/output 2
Overhead Cabling
b
Route the clock cables into the cabinet through the
cable holes on the top of the cabinet.
Route the clock cables downwards along the side
panel of the cabinet to the cable distribution plate.
Route the clock cables through the cable distribution
plate and connect them to the clock ports on the AUX
board.
Trim the clock cables and bind them onto the binding
plate.
9
Installing and Routing External Clock Cables
NOTE
1
2
3
AUX board