Huawei OptiX OSN 3500 - Engineering Labels; Attaching Labels; Attaching Labels to Power Cables; Attaching Labels to Signal Cables

70
1
Attaching Labels
Engineering Labels
As a general rule, attach the labels to the cables 2 cm away from the connectors.
Identification label
Cable
Attach the identification label on top of the cable
when cabling is done horizontally.
Attach the identification label to
the right side of the cable when
cabling is done vertically.
Identification label
Cable
To:
B03 — –48V2
To: B03 — –48V2
If a cable is routed vertically, the label needs to face to the right. If a cable is routed horizontally, the label
needs to face downwards.
To:
A03-33-33-33-33
Optical fiber
Label
Fold to the right
Fold upwards
Attaching Labels to Power Cables
a
Attaching Labels to Signal Cables
b
Optical fiber Optical fiber
NOTE
NOTE