Figure 5-79 Removing the drive backplane
Step 12 Place the removed drive backplane in an ESD bag.
----End
Installing the Front Drive Backplane
Step 1 Wear an ESD wrist strap. For details, see 5.2 ESD Protection.
Step 2 Take a spare drive backplane out of its ESD bag.
Step 3 Hook the drive backplane, and push it in the arrow direction until the latches are
locked and it does not move. See Figure 5-80.
Figure 5-80 Installing the drive backplane
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 5 Removal and Installation
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 140
To Next Page
Loading...
