Pub. 42004-550A
Elemec3 Console Manual—Version 3.0 Page 84 of 114
P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-550A.docx
09/20
Event Group Description—user-defined unique description of the event group. This name identifies the
event group in all areas of the system.
Type: (of Event Group)
• Standard—included events can have mix/attenuation properties that differ from the Global
Mix/Attenuation properties. Use standard event groups for various scenarios where unique
Mix/Attenuation properties are required.
• Sequenced—active events play in sequence if more than one event in the group becomes active.
Active events in the group will effectively take turns playing as long as they are active.
• Contingent Override—initiate an alternate event if more than one event in the group becomes
active.
The contingent event must have a higher priority than the group. For example, if multiple fire
alarm events within the group initiate; the contingent event overrides the active events within the
group.
Group Mix Setup Button—See the Global Audio Mix Setup section.
Scheduled Events
Create scheduled events to schedule recurring events in the E3 system. The SCHEDULED EVENTS screen
lists the E3 system’s scheduled events and displays the properties of the currently selected scheduled
event.
NOTE: Scheduled events requires SNTP (Simple Network Time Protocol) service be accessible by the
E3 controller.
Figure 89. Scheduled Events
To Next Page
Loading...
