119
Manage Your Navigation Data
Manage Groups
Use Groups to organize your navigation data (waypoints, routes, and tracks) in one set. Some anglers prefer to group their navigation
data by trip, fish-type, body of water, or time of day.
Default Group: Your navigation data is saved to My Data, the default group for your control head. You can create new groups and
save new navigation data to them. You can also move saved navigation data to a different group.
Create a New Group
1. Under Options, select Groups.
2. Select New Group.
3. Use the on-screen keyboard to name the new group.
4. Select Save.
Set the Default Group
Your navigation data is saved to My Data as the default group. The instructions in this section allow you to save your new navigation
data to a different group, so as a waypoint, route, or track is saved, it will be saved to the group you’ve set up. You can assign
waypoints, routes, and tracks to different groups, or you can assign them to the same group.
1. Under Options, select Waypoints, Routes, or Tracks.
2. Select Default Settings.
3. Select Group.
4. Select a group from the list.
To create a new group, Select New Group.
5. Repeat these instructions for each type of navigation data.
Move Navigation Data to a Group
1. Under Lists, select Waypoints, Routes, or Tracks.
2. Tap a saved item or use the Joystick to select it.
3. Press the ENTER key.
4. Select My Data (or the current group name).
5. Select a group from the list.
To create a new group, select New Group.
To Next Page
Loading...
Need help?
General
