Humminbird SOLIX series User Manual

150
Radar Overview
RADAR TRANSMISSION SETTINGS
T
he Radar Transmit menu can be accessed from the Power X-Press Menu, the Radar X-Press Menu, and the Radar tab in Settings.
Start/Stop Radar Transmission
Start Transmission: Humminbird CHIRP Radar
1. Power On: Turn on the radar power source (breaker or switch).
2. Open the Power X-Press Menu: Tap the top, right corner of the status bar.
OR
Press the POWER key.
3. Under Radar, select Standby.
4. Start Transmission: Repeat step 2. Under Radar, select Transmit.
Start Transmission: Humminbird Radar
1. Power On: Turn on the radar power source (breaker or switch).
2. Tap the top, right corner of the status bar.
OR
Press the POWER key.
3. Select Radar Transmit > On.
Stop Transmission
1. Tap the top, right corner of the status bar.
OR
Press the POWER key.
2. Humminbird CHIRP Radar: Under Radar, select Off.
Humminbird Radar: Select Radar Transmit > Off.
3. Power Off: Turn off the power source from the breaker or switch.
Starting Humminbird
CHIRP Radar Transmission

Humminbird SOLIX series Specifications

General

Depth-Sonar Standard	Up to 1, 500 feet (varies by model)
Interface	Touchscreen
GPS	Yes
Cartography	Humminbird Basemap
Target Separation	2.5 inches
Networking	Ethernet, NMEA 2000
Memory Card Slot	Yes
Waterproof	IPX7
Operating Frequency	1.2MHz
Dimensions	Varies by model
Weight	Varies by model
Display Size	10.1", 12.1"
Display Resolution	1280 x 800 pixels (varies by model)
Operating Temperature	-15°C to 55°C (5°F to 131°F)