Hunter DSP9200 Series - Equipment Specifications; Safety Summary; Explanation of Symbols

Equipment Specifications
Electrical
Voltage: 230VAC +10% / -15%, 1 phase, 50/60 Hz, power
cable includes NEMA 20 amp plug, L6-20P
Amperage: 3 amperes
Wattage: 920 watts (peak)
Atmospherics
Temperature:
+32qF to +122qF (0qC to +50qC)
Relative Humidity: Up to 95% Non-condensing
Altitude: Up to 6000 ft. (1829 m)
Sound Pressure Level Equivalent continuous A-weighted sound pressure
at operator’s position does not exceed 70 dB (A).
Safety Summary
Explanation of Symbols
These symbols may appear on the equipment.
Alternating current.
Earth ground terminal.
Protective conductor terminal.
l ON (supply) condition.
OFF (supply) condition.
Risk of electrical shock.
Stand-by switch.
Not intended for connection to public
telecommunications network.
8
x
1. Getting Started DSP9200 Series Balancer Operation Instructions