act as a master valve. We usually recommend wiring to the last zone not used in the
controller.
Setup Online
This setup option is prompted when you first go through the initial setup wizard in the
software.
Does your irrigation system have a Master Valve?
In the event you need to change this in the software after the setup wizard, please refer to
the instructions below.
1. Login to your Hydrawise account
2. Click on Zones and Schedules for the PC or Zones if using the mobile app.
3. Choose YES from the drop down above the zones. If you have an HC controller, then
you choose the zone number that you have the master valve wired too.
HC Controller PRO-HC, HPC, and HCC Controllers
To Next Page
Loading...
Need help?
General
