INSTALLATION
17
■
Inside Mount: Attach the stationary rail bottom bracket. The bracket may be attached to
the sill or floor. It may also be attached to the jamb using the inside mount adapter.
➤
Be sure the stationary rail is flush against the jamb.
➤
Floor or sill attachment: Attach the stationary rail bottom bracket using the screw
provided.
➤
Jamb attachment: Use the inside
mount adaptor to secure the stationary
rail to the side of the jamb.
— Slide the inside mount adaptor
onto the stationary rail bottom
bracket. Align the screw hole of
the adaptor to face the side jamb
(or side wall).
— Secure with the provided screw
through the inside mount
adaptor and into the side jamb
(or side wall).
NOTE: If you ordered your shade with a
cut-out, for baseboards or other obstructions, you must use the inside mount adaptor.
CAUTION: Use drywall anchors when mounting into drywall.
Jamb
Attachment
Inside Mount
Adapter
Stationary
Rail Bottom
Bracket
Stationary
Rail Bottom
Bracket
Floor or Sill Attachment Jamb Attachment
To Next Page
Loading...
