39
INSTALLATION – VALANCE
■
Attach the valance to the dovetail brackets, as shown below.
➤
Place the top groove of the valance into the top of the dovetail bracket.
➤
Rotate the valance down and squeeze the dovetail bracket against the valance to
snap it in place.
Room Divider Installation
If you ordered a room divider kit, you received a second valance along with the appropriate
number of rear valance clips. Installation of the shade is the same as an inside mount. The
only additional step is attaching the second valance to the rear side of the headrail.
■
Attach the rear valance clips to the rear of the headrail, as shown below.
■
Attach the rear valance the same way you attached the front valance.
Valance
Squeeze
Outside Mount Inside Mount
Headrail
To Next Page
Loading...
