HunterDouglas Duette - Installation Tools and Preparation

GETTING STARTED
3
Tools and Fasteners Needed
■
Flat blade and magnetic-tipped Phillips screwdrivers
■
Level (laser level is recommended)
■
Measuring tape and pencil
■
Power drill,
3
⁄ 32 " drill bit, and
1
⁄ 4 " hex driver
■
Scissors
In addition, you will need fasteners designed to work with your specific mounting surface(s).
■
#6 Hex Head Screws (Provided). Two 1
1
⁄ 2 " screws are provided per installation bracket.
■
Longer #6 Hex Head Screws (Not Provided). If using spacer blocks, use #6 screws
long enough for a secure attachment.
■
Speed Nuts and Screws (Provided). Extension brackets come with speed nuts
and screws.
■
Drywall Anchors (Not Provided). Use drywall anchors when mounting into drywall.
Speed Nut
and Screw
(Two Provided with
Each Extension Bracket)
#6 x 1
1
∕ 2 "
Hex Head Screw
(Provided)
Longer #6 Hex Head Screw
for Use with Spacer Blocks
(Not Provided)