HunterDouglas Duette - Operation and Maintenance; Using PowerView App and Remote

OPERATION
30
Operating the PowerView
®
App and Gen 3 Remote
Syncing and Programming Your Remote
■
Activate the remote by pulling both plastic tabs from the back battery compartment.
■
Download the PowerView
®
App for your smartphone or tablet at hdpvapp.com.
■
Open the PowerView App and follow the steps to set up your new shades and remote.
■
Use the PowerView App to program and manage your PowerView Gen 3 remote(s)
as accessories.
■
For more details, refer to the digital PowerView Gen 3 Automation Remote Control Guide.
Basic Operation
■
Wake up the remote by picking it up or pressing ■ STOP.
■
Press group number(s) 1, 2, 3, 4, 5, and/or 6 to select one or more groups. Selected group
numbers light up white on the remote.
■
Press selected group number(s) 1, 2, 3, 4, 5 and/or 6 a second time to deselect one or
more groups. Deselected group numbers are not lit.
OPEN
LEFT ARROW
RIGHT ARROW
STOP
- Stops motion
- Press to traverse the
selected shade(s) open,
uncovering the opening
CLOSE
- Press to traverse the
selected shade(s) closed,
covering the opening
- No function
- No function
FAVORITE
- Press once to send
shade(s) to the
first Favorite position*
- Quickly press twice to
send shade(s) to the
second Favorite position**
GROUP NUMBERS
Each number represents
a different group
*The default first Favorite position for the shade is 50% open.
**Both Favorite positions can be updated in the PowerView App > Shade Settings.
- Press to select
all groups
ALL