INSTALLATION
12
Install the Fabric Stack
NOTE: The installation procedures that follow are the same for inside and outside mounts,
except where indicated.
Prepare the Fabric Stack
■
Start with the left fabric stack. Insert the left bracket of the stationary rail bracket into the
vertical rail (on the side where the fabric stacks).
➤
The bracket fits into the grooves on the rear of the vertical rail.
➤
Insert the bracket until it is seated and the bracket catch snaps into the hole on the
back of the rail. Check that the bracket catch is fully engaged.
Insert Bracket
into Grooves
Continue to
Slide Bracket
Seated Bracket
Bracket Catch
To Next Page
Loading...
