HunterDouglas Duette - Shade Reset and Limit Adjustments

OPERATION
32
Resetting the Shade
Calibration Reset
The calibration reset is used to recalibrate the shade's travel limits. This action is performed
in the PowerView
®
App.
■
Select Calibrate Shade in the Advanced Options section of the Shade Settings menu in the
PowerView App.
■
The shade will open, then finish in the closed position. When the shade stops moving,
calibration is complete.
Resetting Shade Programming
The PowerView App may be used to modify or reset any shade programming to PowerView
Gen 3 remotes, and gateways. Shades may also be deleted from the PowerView App in the
Advanced Options section of the Shade Settings menu.
Electronic Limit Adjustments
Electronic limits are set at the factory and normally do not require readjustment. For window
treatments that may need additional adjustment or to set custom limit positions, go to Shade
Settings in the PowerView App to adjust limits.