INSTALLATION
23
■
Tension the cord.
IMPORTANT: When the cord is properly tensioned, the moving rail slides easily yet holds
its position anywhere along its travel.
➤
Slide the cord tensioner along its channel in the headrail until the cord is taut.
➤
Manually open and close the fabric stack several times. This
evenly distributes tension throughout the shade. Use a level to
ensure the top and bottom of the shade are straight.
➤
If necessary, readjust the cord tensioner by sliding it until the cord is taut. Check to
ensure the proper tension. Make any needed adjustments by sliding the cord tensioner
in its channel so that the moving rail slides easily and holds its position anywhere
along its travel.
To Next Page
Loading...
