INSTALLATION – VALANCE
36
■
Wider shades with two-piece valances: Splice the two pieces together using the
valance splice.
➤
Lay the two pieces face-down on a
flat surface with the valance splice
between them, as shown at the right.
➤
Insert the valance splice into one of the
sections.
➤
Press the other section onto the valance
splice. Be sure both sections of the
valance are firmly seated onto
the splice.
➤
As shown in this front view, the
valance splice serves as a small
decorative keystone, which is
centered on the valance.
Valance Splice
To Next Page
Loading...
