5. Check all those that apply:
Free exit Inside Obstruction Loop Outside Obstruction Loop
Open edge Close edge Open photo eye Close photo eye
Stop input (1) Local Open (2) Close timer set (3) Radio open (4)
IES sensor Fire Dept. Open Emergency Close Solenoid lock
WARNING placards mounted on both sides of the barrier arm within sight of vehicle and pedestrian
trafc per UL 325 standards.
6. Sensors programmed properly.
7. If installed, arm lights working properly.
Date:
Operator Serial Number: ____________________________________________________________________
Installer Name (please print): _________________________________________________________________
End user’s name (please print): ________________________________________________________________
Site address: _______________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
___________________________________________________________________________________________
Notes: ____________________________________________________________________________________
___________________________________________________________________________________________
MX3657-01 Rev. D ©2020
132 hysecurity.com | 800-321-9947 StrongArm Programming and Operations
To Next Page
Loading...
Need help?
General
