MX3657-01 Rev. D ©2020 Important Safety Instructions
hysecurity.com | 800-321-9947 15
IMPORTANT SAFETY INFORMATION
HySecurity Vertical Barrier Arm Safety and Traffi c Control
ARM INSTALLATION
Do not install the operator where arm moves within 16 inches of a rigid object or within 10 feet of high
power wires when the barrier arm is raised.
TRAFFIC SPEED
The acceptable speed through the gate entry or exit is 5 MPH. To help regulate traffi c, speed limit
signs, hazard stripes, and speed bumps may be utilized.
USER RESPONSIBILITY
The user is responsible for gate safety and should familiarize themselves with all aspects of gate
operation, including:
WARNINGS FOR BARRIER ARM SAFETY
• Arm barriers are meant ONLY for vehicles; bicycles, motorcycles, and pedestrians are
NOT permitted through the barrier arm gate system.
• The gate system should be installed so that the person operating the gate can observe
the entire movement of barrier arm.
• The gate operator controls should be located at least 6 feet away from the barrier arm to
prevent controls being used by an operator while in contact with the barrier arm.
• Emergency access controls must be protected from unauthorized use and placed so that
emergency personel can access them.
• Keep all persons and children away from the gate entry/exit and all hazrad areas.
• A separate and clearly marked entry/exit pathway must be provided for pedestrian traffi c
to prevent contact with the barrier arm.
• All electrical connections must be made in accordance to local electrical codes.
• To avoid unauthorized use of the controls, install security features on the barrier arm
operator, such as a lock.
• When manually operating the barrier arm, ensure that no vehicles or pedestrians are in
the gate area.
hardware operation
entrapment protection
electrical and mechanical safety
arm reversing functions and testing
• edge contact sensors
• photoelectric eye sensors
• gate operator accessories (alarms,
radio, etc.)
To Next Page
Loading...
Need help?
General
