19
8. Wiring Cable
In an application where the cable cannot be anchored, try to place the cable so that it sags only under
its own weight or use self-standing type cable as large radial wire duct to limit the load on the cable.
Never cut and/or reconnect the cables supplied with the product for the purpose of extending or
shortening the cable length.
The cables supplied with the actuator offer excellent flexibility, but they are not robot cables. If the
cables are to be stored in a movable cable duct (cable track, etc.), use robot cables.
For cable modification, please contact your IAI sales representative.
To Next Page
Loading...
