1
1. Foreword
Thank you for purchasing an IAI product.
This manual explains the structure, correct operation and maintenance of the actuator.
Please read this manual carefully before using the product.
For more complete information on operating the actuator, please also refer to the controller operating
manual.
2. Safety Precautions
2.1 Basic Operating Instructions
Please do not attempt to use or operate the actuator in any manner not indicated in this manual or the
controller manual.
Please be sure to use only the cable provided by IAI to connect the actuator and controller.
Please do not allow people within the moving range of the unit when it is in operation or when the
power is ON since this is dangerous.
2.2 Maintenance and Inspection
When doing maintenance and inspection work, always shut down the controller power first.
When doing inspection, make sure that no one can inadvertently turn the power ON.
Make sure that a sign indicating work in progress is clearly visible.
If several persons are working, be sure to watch out for each other's safety. In particular, check before
turning power ON or OFF and let others know if you are doing work involving axis movement.
(Note)
The content of this manual is subject to change without notice for the purpose of improvement.
This manual was created with utmost attention to precision. Should you find any error, however, or if
you have any question, please contact IAI’s Sales Engineering or Technical Service Section.
To Next Page
Loading...
Need help?
General
