IBM 3409-S03

Appendix B. Standards and regulations
The appliance is designed to comply with the standards and regulations enumerated in sections below.
This compliance includes any sample units.
EMC qualification
Slicestor
®
2584 meets a number of EMC standards.
Slicestor
®
2584 carries EMC approval for the following territories:
v Australia/New Zealand
v Canada
v European Union
v United States of America
v Taiwan (CNS 13438-2006)
Conducted emission limit levels
Slicestor
®
2584 complies with the following EMC conducted emission limit standards to a greater than
6dB margin:
v EN 55022:2006 including A1:2007 / CISPR 22-Class A
v United States CFR47 Part 15: Radio Frequency Devices, Subpart B: Unintentional Radiators, Class A
Class A labeling is used.
Radiated emissions limit levels
Slicestor
®
2584 complies with the following EMC radiated emission limit standards to a greater than 6dB
margin:
v EN 55022:2006 including A1:2007 / CISPR 22-Class A
v Individual shelves and towers comply with United States CFR47 Part 15: Radio Frequency Devices,
Subpart B: Unintentional Radiators, Class A
Class A labeling is used.
Harmonics
EMC harmonics are in accordance with EN 61000-3-2:2006.
Flicker
EMC flicker is in accordance with EN 61000-3-3:2008.
Immunity limit levels
EMC immunity is in accordance with European standard EN 50024:1998 including A1:2001 and A2:2003.
© Copyright IBM Corp. 2016, 2018 55