IBM 3409-S03

Table 23. POST Codes – BDS Phase (continued)
DXE_SMBUS_INIT 0x50
DXE_SMART_TIMER_INIT 0x51
DXE_PCRTC_INIT 0x52
DXE_SATA_INIT 0x53
DXE_SMM_CONTROLER_INIT 0x54
DXE_LEGACY_INTERRUPT 0x55
DXE_RELOCATE_SMBASE 0x56
DXE_FIRST_SMI 0x57
DXE_VTD_INIT 0x58
DXE_BEFORE_CSM16_INIT 0x59
DXE_AFTER_CSM16_INIT 0x5A
DXE_LOAD_ACPI_TABLE 0x5B
DXE_SB_DISPATCH 0x5C
DXE_SB_IOTRAP_INIT 0x5D
DXE_SUBCLASS_DRIVER 0x5E
DXE_PPM_INIT 0x5F
DXE_HECIDRV_INIT 0x60
DXE_VARIABLE_RECLAIM 0x61
DXE_FLASH_PART_NONSUPPORT 0x62
BDS Phase
POST Codes – BDS Phase
Table 24. POST Codes – BDS Phase
Description Value
BDS_ENTER_BDS 0x10
BDS_INSTALL_HOTKEY 0x11
BDS_ASF_INIT 0x12
BDS_PCI_ENUMERATION_START 0x13
BDS_BEFORE_PCIIO_INSTALL 0x14
BDS_PCI_ENUMERATION_END 0x15
BDS_CONNECT_CONSOLE_IN 0x16
BDS_CONNECT_CONSOLE_OUT 0x17
BDS_CONNECT_STD_ERR 0x18
BDS_CONNECT_USB_HC 0x19
BDS_CONNECT_USB_BUS 0x1A
BDS_CONNECT_USB_DEVICE 0x1B
BDS_NO_CONSOLE_ACTION 0x1C
BDS_DISPLAY_LOGO_SYSTEM_INFO 0x1D
BDS_START_IDE_CONTROLLER 0x1E
BDS_START_SATA_CONTROLLER 0x1F
58 Slicestor
®
2584 Appliance Manual