IBM 6000 - Summary of Supported Host Interface Adapters; Summary of Supported Active Optical Cables for Host Interface Adapters - Infiniband Protocol; Summary of Supported Passive Optical Cables for Host Interface Adapters - Infiniband and Ethernet Protocols; Summary of Supported Transceivers for Host Interface Adapters

Table 19. Summary of supported host interface adapters
Protocol Feature code Ports FRU part
number
Quantity supported per
enclosure
CX7 NDR 200 Gb,
dual VPI
AJQS 2 per adapter 01LL984 Maximum quantity of 8,
between the two adapters.
Order increments allowed for
each adapter feature = 2 (2, 4,
6, or 8).
CX7 NDR 400 Gb,
single port, in PCIe
form factor
AJQQ 1 per adapter 01LL983
Table 20. Summary of supported active optical cables for host interface adapters - InniBand protocol
Description Length Feature code Used with switch/
adapter
NVIDIA HDR 200 Gb QSFP56
MMF.
For more information, see
NVIDIA documentation.
5 m EBBB CX-7 dual port VPI
QSFP112
30 m EBBF
NVIDIA splitter, twin-port, HDR
400 Gb/s to 2x 200 Gb/s, OSFP
to 2x QSFP56
For more information, see
NVIDIA documentation.
5 m AJR8 NDR TOR to CX-7 dual
port VPI
30 m AJR9
Table 21. Summary of supported passive optical cables for host interface adapters - InniBand and Ethernet
protocols
Description Length Feature code Used with switch/
adapter
NVIDIA, MMF, MPO12 APC to
MPO12 APC
5 m AJQV
NDR200 (CX-7 only)
Single: InniBand /
Ethernet
30 m AJQY
NVIDIA, MMF, MPO12 APC to
2xMPO12 APC
5 m AJR2
NDR200 (CX-7 only)
Splitter: InniBand /
Ethernet
30 m AJR5
For more information, see NVIDIA documentation.
Table 22. Summary of supported transceivers for host interface adapters
Description Length Feature code Protocol Used with switch/
adapter
Single port NDR OSPF
transceiver, 400 Gbps,
flat-top single MPO/
APC, 8 Watts.
For more information,
see NVIDIA
documentation.
30 m AJQU InniBand CX-7, single port OSFP.
38IBM Storage Scale System 6000: Hardware Planning and Installation Guide